Tactics of Mechanical Installation - HVAC, Elevators, Fire Alarm, Pumps, Isolation Materials, etc.
| Start Date: |
2 Feb 2025 |
| End Date: |
6 Feb 2025 |
| Duration: |
5 |
| Fees: |
|
| Country: |
Munich / Germany
|
| Category: |
Engineering and Technical Programs
|
|
Details: |
Objectives:
Upon completion of this course, participants will have a thorough understanding of the fundamental concepts of Mechanical installations techniques. Participants will have in-depth knowledge of HVAC, Elevators,
Fire fighting
and fire alarm systems, Pumps, Drainage system,
Heating
system , isolation materials inside the buildings, equipment selection, proper operation,
trouble shooting
through
presentation of actual case studies.
Participants will divide into two or three groups and each group will receive a project and at the end of this course, each group will present their project design. Who should attend:
The course should benefit engineering personnel responsible for Mechanical systems. Daily Outlines:
Fire fighting and Fire Alarm systems
1.What is the fire
2. What is the fire fighting system
3.Classification of occupancies
4.Dead
end points
5.Travel
distances
6.Types of sprinkler systems
7.Types of sprinklers
8.Dry pipe sprinkler system
9.Deluge & Pre-action system
10.Refrigerated spaces
11.
Commercial type cooking equipment
12. Wet-pipe sprinkler system
13.Basic Design of Sprinkler systems
14.How to design a project
15.Sprinkler distribution inside the places
16.Water network distribution & sizing
17.Hydraulic calculation procedures and
fire fighting program
18.Training on how to use hydraulic calculation program
19.Installation
20.Testing and Commissioning
Introduction to HVAC
What is Air-Conditioning?
The Major processes of Air-Conditioning
The Major applications of Air-Conditioning
Selection of a system
The Major HVAC system Types
Heat transmission in building structures.
Environmental Health and Indoor Air Quality
Indoor air quality effects on comfort and health
Equipment and design strategies for improving and maintaining acceptable indoor air quality
Cooling Towers
Secondary system components
Duct and Pipe systems
Fans and Pumps
Central Systems
Major HVAC system types
Application of a basic central system
Selection of system components
Heating exchangers and cooling coils
Variable Refrigerant Volume system (VRV)
Adsorption system
All-Air systems
Introduction to All-Air systems
Single-duct, Single zone or Zoned reheat, Constant volume systems
Variable Air Volume
Dual duct system
Three deck multi zone system
System Controls
Control fundamentals
Types of control action
Air system procedures & air measurement .
Water systems data .
Test procedures.
Actual Project Case study
INTRODUCTION AND COMMON BASICS OF PLUMBING SYSTEMS
Classification of water networks and its components.
Performance parameters.
Solvent system
Cold water systems
Design of Water networks.
Service water heating systems
Methods of heat development
Equipment thermal design parameter and basic types
Pipe sizing
Supply pipe system
Return piping system
Water pressure-kitchen hot water supply
Water heating efficiencies and design considerations
Water quality, corrosion
and scale
Hot water utilization temperatures
Hot water from storage tanks and storage systems
Safety devices for hot water supply systems
Estimate the hot water requirements and sizing the storage-type equipment for residential, commercial, industrial, institutional buildings
Steam and condensate piping
Water hammer
Heat-up method
Sizing the traps
Installation
Air venting
Fuel gas piping
Definitions
Appliances
Pumps
Types of pumps
Pump performance
Characteristic curves
Fault diagnosis
and
trouble shooting.
Cavitations and NPSH.
Water hammer calculations
Installation and operating problems
Energy conservation in water systems design
Definitions
Performance efficiency
Saving energy
Maintenance plane preparation outline
Field
check list
Hydraulic pressure test procedures
Flushing techniques
Case study |
